The turntable from paper (or paper weather vane) is a favorite toy of every child, even now, when stores are filled with ultra-modern and fiddle toys of a new generation. Especially such turntables are popular in the warm season, when the kids can walk long on the street even in windy weather. In any sandbox, this toy will not be ignored to your kids.
Such a turntable flower can become an original addition to any children's gift, and maybe an independent gift. These funny free freougores were represented in December 2008 in the journal on Scrapbook Keepsakes, by Heather Bailey. But the idea is so wonderful that is popular to this day. Therefore, I gladly give her attention to you.
Materials and tools:
- 2 double-sided cardboard sheets (18 * 18 cm); - pieces of scrapbooks to decorate the center of therapy; - decorative buttons; - round bead with a diameter of about 1-1.5 cm; - recorder; - wire; - narrow decorative tape; - Wooden wand .
Step 1. Print and cut pattern. Using a pencil, transfer the carved pattern to two-way cardboard and cut two parts. I recommend using two-sided scrapbook to use both the other side. The turntable in this case will be bright and harmonious in color. Cut the templates from cardboard and hold holes at points marked in the diagram (black points along the edges and in the middle). You can download the template on our forum free, the link is at the end of the article.
Step 2. Formation of a turntable flower. Enter the cut parts from each other and align them in the center, and then twist the turntable petals so that they alternate (see the scheme). Make these two parts in the area designated on the dotted circle template, make a hole in the center of the circle and insert the lumens into it. (I note that the lover needs to pick up with a rather long leg, as each petal with a hole must also be driven onto the feet of the champs). Now every petal with a done hole needs to be beatened to the center and drive the chapenet on the leg. When all the petals be bent to the middle, the lover will need to fix it, flattening his leg.
Step 3. Preparation of a holder stick. Color wooden wand White acrylic paint, dry. From one edge, drill a hole through which the turntable will be attached to the stick. Then swollen a narrow satin ribbon and secure its edges on a stick with glue.
Step 4. Formation of the spindle. Take the wire and, retreating from the edge of about 1 cm, take a bend at an angle of 90 degrees. From scrapbooks or color cardboard cut out two small circles, in one of which make a hole in the center. On the curved end of the wire, we first mug with a hole, and on top of it glue the circles without a hole so that the bellged end of the wire is between two circles. Thus, we made the part of the turntable, on which the flower - spindle will spin. Now it can be decorated at your discretion - cut flowers from paper or glue decorative buttons and beads.
Step 5. Assembling parts of the turntable. On the spindle (wire with a flower) put on the turntable flower, then a wooden bead. The free edge of the wire is threaded into the hole on the sticks. Leaving a small gap between the bead and wand, secure the wire on the sticks, wrapped the wire around it.
Pack of paper on a stick (breeze) is one of the most popular toys among children who can be made with their own hands literally in 5 minutes. Best of all such a toy is suitable for the game in the warm season, when the kids spend time on the street. There are a large number of options for the vertex of paper and now we will look at the most basic with detailed step-by-step photos. To make turntables from paper, both adults and children, truth under the closer attention of the elders, because the scissors and pins will have to use (wire.)
Paper turntable with your own hands for children: step-by-step master class
- Tight paper square shape (we have paper for scrapbooking)
- Pencil with erasing elastic at the end
- Simple pencil
- Boulat with a hat
Paper for scrapbooking has two sides: color and white. Here on the white we are just and we will do all markings. We carry out two diagonal lines using a simple pencil.
Next, you need to make a mark at a distance of 3 cm from the center for all 4 lines.
We will rely on these marks when we cut our future turntable paper.
We take into the hands of the scissors and make 4 outbreaks strictly along the lines, without going for the pre-made markers. Each of the 4 received element can be bent a bit
It remains for small - to collect our breeze from paper, using a thin sewing pin for it. We look at the center of the future toy from the front side.
Now you need to bend our pin at a certain angle. You can trust this operation only adults. You can do it with your hands, or taking advantage of the pliers.
We start collecting a toy, gazing every corner of the item on our pin, making it on the front side.
Next you need to insert the tip of the pin into the rubber band at the end of the pencil.
Our children's turntable from paper is ready and you can immediately try it in the case, running around the room or just the maiden on it.
Paper turntable paper with eight blades
If you want your child to be specially popular in the playground, then you can make him a turntable from paper, which will have 8 blades. Especially impressive it will look if you use two multiple of different colors.
Create a sketch of our toy, using the usual notebook sheet for this.
We carry our sketch for each of the prepared squares, cutting with scissors along the lines.
Now it is necessary to combine two sheets in such a way that the grooves of one sheet entered into the dumps of another sheet.
It remains only to collect our turntable from paper, making holes on each of the corners and bent them to the center.
You can fix the design as past version, with a pencil and pins, and you can use another method.
To do this, we will need several beads and a thin wire.
Wrapping the wire around our wand and fix it. We dress oval beads, after which we put our workpiece and set some more small beads.
It remains only to get all the petals on the wire and secure the remaining wire end.
Round turntable from paper that spins
A simple variant of creating a children's paper turntable, which has unusual forms. It is best for this bright colored paper.
Using the scheme, draw the contours of our workpiece.
After that, cut out the toy along the outer circle and make cuts in the center, flexing the resulting valve.
We collect a toy, inserting a bead to the center and fixing everything on a skewer, using wires and beads.
An interesting version of an eight-sand turntable, which will long attract your child's attention.
- Two-way cardboard - 2 pcs.
- Decorative buttons
- Round bead size 10-15 mm
- Non-smoke decorative ribbon
- Wooden stick (skewer)
Print our template and transfer it to our colored paper. Cut out the workpiece, without forgetting to do the holes in each of the corners.
We combine both of our billets in the center and intertwining so that they alternate. After that, you need to glue two sheets and make a hole in the center, where we will insert our lover. It should be long enough to fit all eight corners to him.
We drive the corners and wear them on the luber. After that, the lovers need to be slightly flattering, thereby fixing the position of the blades of the purple paper.
So that your cloth is exactly the most beautiful, you can make a beautiful wand, decorating it with a narrow decorative ribbon. Following the scheme, prepare the fastening of our toy.
We collect a toy using the details obtained at last stages. In the picture, everything is very clear.
Papers from paper: many photos
More interesting articles on needlework:
Master class "Children's turntables-breeches do it yourself"
Anna Wheel Master class "Children's turntables-breeches do it yourself"
Children's turntables do it yourself
In such hot sunny days, I want to offer you Master Class , as do it yourself to make different baby bins-turntables : 4-blade, 5.6 and 8-blade. Work time - 5-10 minutes. We need : paper sheet, cardboard or folder-folder side (you can double-sided cardboard or special paper for origami, wand (I have a flat wooden wand for sushi, wire for crafts with a diameter of 3 mm, as a limiter (2 large beads, small pieces of tubules from cocktail or t. p., scissors, pencil, line. Four-blade Children's breeze : Cut the square (I have 14/14 cm) and conduct a diagonal pencil or just fold. According to the intended lines, we make cuts to the center, without reaching the middle of 1.5 cm. Scissors cut holes in the middle and on one of the corners of the base of the resulting triangle. Hound on the wand several turns of the wire (it is better to hold the pliers for loyalty, and we ride a bead or any other suitable limiter. It is necessary in order to Vertushka The rotation did not hurt the wand. Next, collect The turntable according to the scheme . And again a bead ... the tail of the wire slightly spirals in order to secure everything. You do not need to delay Vertushka Must rotate freely. Beads can be replaced by pieces of tubes from a cocktail or any other suitable limiter. I repeat : do not tighten a lot Vertushushka , it should rotate freely. You can experiment with patterned edges and sizes. Vertushki . Piathadable and hexelobate Vertushki The same principle is done, the difference is only in the source templates. Octa-blade Children's turntushka : This Vertushka Collected from two four-blade. We will need two square blanks, but they are cut a little differently. Immediately make holes in the center, it is more convenient. We combine two squares so that the grooves of one sheet entered into the grooves of the other. And then everything, as in the previous version - do holes, make a wand and put on beads and blades The turntables on the wire . The middle can be secured with glue (for example, transparent universal glue "Moment" ). Mains can be decorated : Just fix on the wire any button for hot glue (or glue "Moment" ). Create with pleasure and delight His children ! I was glad to help.Publications on the topic:
Children's musical instruments do it yourself I want to share the experience of making children's musical instruments with your own hands. As soon as the competition was announced in our garden, right there.
Master class "Penndasnitsa do it yourself" Dear colleagues! I would like to share a pencil option made by your own hands. That seems to be a simple thing - a pencil, and such.
Master class "Flowers do it yourself" I bring to your attention the master class "Flowers with your own hands." For the manufacture of colors we need: colored napkins or corrugated.
Master class "Photo frame with your own hands" Dear colleagues, I want to submit a master class on making a photo frame with your own hands in not traditional plasticography technique. Engaged.
Master class "Photo frame with your own hands" Such an element of the interior as a framework is used very often. The stores are greatly selected for the framework, and even the most arrogant buyer is always.
Master class "Dolls do it yourself" Authors: Golovkin G. A., Yakunkova A. V. MBDOU "Kindergarten №6", Sarov Modern children are surrounded by abundance of bright toys that.
Master class "Lapbuk do it yourself" Municipal budgetary preschool educational institution Kindergarten "Rainbow" of the workers' village Sosnovoborsk master class.
Master class "Mobile do it yourself" For the New Year holidays, there is always a desire to decorate the receiving and group room somehow differently, not as last year and.
Master class "Postcard do it yourself" For our postcard, which you can cook with the children and give to the holiday Mama, grandmothers, you can also give it for a day.
Project "Children's books do it yourself" Project "Children's books with their own hands" prepared a project: Educator Belsky A. V. Project type: • Social, cognitive-creative; •short.
We decided to make a paper turntable from Katya. Having studied the issue on the Internet, and having conducted field tests, we realized that from all the variety of designs and forms the best turntable is the classic four-blade. A good result was shown by models with eight blades and in the form of a circle with flexible valves. All others: from a triangle, from a hexagon, out of stripes, in the form of flowerfish with flexible petals - everything is spinning badly. Therefore, we focused on the selected three models. And then even the schemes for printing inscribed to make it easier to cut - print on color paper - and everything :)
That's what we did:
|That's how many different turntables can get just only three basic schemes!|
And much later - for the lessons "We study the wind"
Then I will show a detailed master class, how to do baby paper turntables: 4-blade , 8 blade и circular .
Schemes for printing attached :)
It will be 2 sheet A4 and another sheet - the instruction, it is not necessary to print - just read it.
Files are made in black and white.
To download schemes for the printout of these three vertex options, you need to subscribe to the newsletter of my blog "It's interesting!"
To do this, in the form below, write your name and e-mail.
After that, you will receive an email to send mail to mail - you will need to click on it on a reference that you agree to get the materials from me (this is your spam protection :)
And after you confirm the desire to receive letters, in a couple of minutes, the second letter will come from me with a file to print the turntables.
And now more, how to do all these turntables.
We will need: a square sheet of paper (we took two sheets 14x14 cm and glued them so that the turntance was multicolored, but there is a special paper for origami - it is already two-way painting), a wand (I used a bamboo skeleton), a piece of wire, a few beads or Cocktail tubes trimming.
Work time - 5-10 minutes.
|What to do the turntable|
The turntable scheme is such:
|Simple-chopped paper turntable|
And now Katya will show a master class - how to do it all)))
Bottling the square on the diagonals.
We cut on the outlined lines without reaching the middle (somewhere centimeters by 6).
Shell make holes in the middle (at the intersection of diagonals) and on one of the corners.
It should be like this:
Now we cook the wand - we screw the wire on it several turns, and we ride a bead or any other limiter. It is necessary so that the turntable when rotating does not hurt the wand.
Now we put our square.
After again we ride several beads so that the blades are not pressed to the base and the middle of the turntable was more voluminous - so it will be better spinning.
And now in turn we put on a wire corner with holes.
It should turn out so.
Fix the blades by riding the wire more beads and fixing the tip. Do not tighten the turntable much, it should rotate freely.
You can experiment with patterned edges, with the sizes of the turntable.
We made three small out of thin packaging foil and attached them to one wand. Here they are spinning merrive all. Apparently due to the fact that the lightest.
|Three turntables on one stick|
|Ordinary four-blade turntable|
There is nothing to tell. Cut on a solid contour. The valves are cut into the dotted semicircular valves. It is better if the base is not single, but glued out of two sheets or carved from thick paper - as fast.
|Circuit round turntables|
This turntable "is going" from two four-blade. We will need two square blanks. But they will need to cut them somewhat differently.
|Scheme of eight-grade turntable|
Unfortunately, photographed already during electrical lighting, so the photo alas: (
We combine two squares so that the grooves of one sheet entered into the dumps of the other (see the scheme).
And then, everything, as in the previous version, do holes (I drew out where they need it), we make a stick and put on beads and blades of the turntable.
|Purple of paper - 8 blades|
I asked Katya to come up with a fairy tale about our turntables. That's what happened she (I practically did not edit :)
Tale about Vertushka (by Katya, 5 years old)
"Once, when we lived at home, there was a strong wind, and we didn't have the turntables. We were then primitive :) And they didn't know how to do them. Then we went to a big oak. And there were three doors, and For them, something pounded and poured. It worked coals. They gave us wand and paper, and we made a turntable. Thevert we attached on the balcony. But the wind was so strong that she was twisted as a helicopter, and our house flew. He flew Above the city, and then flew to Africa. In Africa, the wind does not happen. Therefore, the house fell. But he did not crash, because he fell into the sand, and the sand is soft. The house remained standing in the desert, and we will now have a new address: Africa, Street Rostov, house 1 (one, because there are no other houses!). "))))) These are the adventures :)
Cottage is always a family vacation. There is no doubt that the defector is always something to do in nature. But still you can help small leanters and create something together. In this case, the crafts are better to do simple, colorful and useful. For the outdoor games there is nothing better how to make a turntable.
Wind, wind, breeze
Children of any age love to learn everything around them. To know the properties of the natural element of children will help the turntable "breeze".
The toy is sold in any toy store, but there is no better option, how to make a breeze with your own hands. First, this event makes it possible to spend time with the whole family for an interesting occupation. Secondly, creativity develops a sense of beauty in children, hons up the elementary skills of working with various tools and materials.
Thirdly, the result is the original handicraft, which can then be used for games or decorative purposes on the site.
It is simple to create a toy with your own hands. For this, it is not necessary to possess special skills. The manufacturing process consists of several stages:
- Selection of material. To create a disposable turntable, you can use paper or cardboard. If you need a toy for a long period, it is better to use thin plastic, for example, a plastic bottle or a dense cellophan.
- Drawing. The drawing is necessary for accurate compliance with proportions and shapes. In addition, the outline will determine the size of the finished product.
- Making toys.
Creating a turntable - the process is simple and will not require special efforts and costs. However, the result will delight not only kids, but also parents.
The turntable is always associated with the holiday. This subject is always on sale at fairs, in trading stalls at the circus or zoo. In the manufacture of the turntable is simple, and the process will require a minimum of time .
For crafts, you will need:
- Colored paper, cardboard or thin plastic. It is better to take double-sided material so that the toy has a beautiful view. You can use multi-colored material, for example, with pictures, patterns, with small prints.
- Pencil or pen.
- Adhesive gun or universal glue, for example, "dragon".
- A wand made of wood or plastic, a metal tube of a small diameter and about 30-40 centimeters long.
- Stationery pin.
- Decorative elements: beads, flowers, ribbons.
After the materials and tools are prepared, you can proceed to the creation of crafts.
From the basics (paper, cardboard, plastic) square cut . The length of the parties may vary depending on the desired product size. To obtain a medium-sized turntable, a square is taken with the sides of 20 centimeters.
Using a line with a simple pencil, two square diagonals are held . It turns out the point of intersection of lines - center.
The center is measured by 1.5 centimeters in the direction of the corners, the mark on each of the four lines is placed. A screw is made from the angle of the square to the noted points along the diagonal line.
Each corner alternately sticks to the center, thereby bends each blade of the future "breeze". The center is made with a thick needle or knitting needle.
The resulting propeller can be decorated, placing additional elements on the blade . Mandatory condition - the decor should not be volumetric not to prevent the rotation of the structure.
The wand is attached to the "breeze". It is not recommended to fasten the details tightly, there should be a few millimeters between them. To do this, you can wind on the needle in the interval between the details of the thread. So the toy will spin well.
You can use the "breeze" as an entertainment item for kids, attaching the turntable to the wheelchair or Maneja.
If you manifold a fantasy, then the turntable can be used as a decorative garden decoration. In this case, you need to choose a more durable material than paper and cardboard. Plastic or aluminum "breeches" can be used to decorate flower beds, veranda, terraces.
Now we use the hole punch and make holes.
Watch the corners that are with holes.
Under each corner, you can drop a little glue.
If you do everything neatly, then it will be such a beauty.))
Now, you need to come up with something the turntable will hold. An ordinary pencil can be consolidated for small turf. At first, we do through the holes at the turntable, the pin, and then sneak it.
But if our turntable is big, it is better to fix it on a stick.
Cut a piece of elasty and make a hole in it under our wand. (I would still inside the hole of the pin a little glue.)
We proceed to the assembly, we skip the pin through the holes in the turntable (the holes can be decorated with an activation, below will be shown in the video)
And on the reverse side, pinch the pin, squeezing it.
Here is a detailed video.
Here is a pattern.
Another idea how to fix the turntable on a stick.
Complete and very beautiful option.
Print and cut out the template, using a pencil to carry the cut-out pattern on double-sided cardboard and cut out in two copies. We do holes at points designated in the diagram (black dots at the edges and in the middle).
We form a turntable flower. Let's leave the carved parts on each other and compatible them in the center, and then we pass the turntable petals so that they alternate (see the scheme). We glue these two details in the area designated on the pattern by the dotted circle, we will make a hole in the center of the circle and insert the lover in it. (I note that the lover needs to pick up with a rather long leg, as each petal with a hole must also be driven onto the feet of the champs). Now every petal with the hole done by the hole is stirred to the center and ride on the feet of the champ. When all the petals be bent to the middle, the lover will need to fix it, flattening his leg.
Wand holder paint white acrylic paint. From one edge drills a hole through which the turntable will be attached to the stick. Then we decorate the stick with a narrow satin ribbon and fix its edges on a wand with glue. The wire and, depart from the edge of about 1 cm, we make a bend at an angle of 90 degrees. From color cardboard, cut out two small circles, in one of which we make a hole in the center. On the curved end of the wire, we first wear a mug with a hole, and we glue the circles on top of it without a hole so that the coiled end of the wire is between two circles. Thus, we made the part of the turntable, on which the flower - spindle will spin. Now it can be decorated at your discretion - cut flowers from paper or glue decorative buttons and beads.
We collect all parts of the turntable. On the spindle (wire with a flower), we put the turntable flower, then a wooden bead. The free edge of the wire is to the hole on the sticks. Leaving a small gap between a bead and a wand, fasten the wire on the sticks, wrapped the wire around it.
This is the beauty resulting in the end.
Multiple templates for turntables. (He did not try herself that he could succeed)
Decorative decoration for the tubes is very useful for the holidays.
Giant turntables for photo.
Here is such a summer beauty!)) Let's try!